2B MillEN 2B
Smooth, moderately reflective cold-rolled finish. The workhorse — annealed, pickled and skin-passed.
Best for tanks, general fabrication, base for further finishing
Surface Finishes
Ten ways to
finish a face.
The surface is half the spec. Hover any swatch to catch the gloss-sweep — then send us the look you're after and we'll process it in-house.
BA — Bright AnnealedEN 2R
Bright, highly reflective mirror-like finish from annealing in a controlled atmosphere.
Best for appliances, lighting, reflective trims
No.4 Brushed180–240 GRIT
Uniform directional satin grain. The go-to architectural and food-equipment finish.
Best for kitchens, cladding, lifts, signage
HairlineHL
Long, fine continuous grain lines — subtler and finer than No.4, very refined.
Best for elevator panels, interior architecture
No.8 MirrorPOLISHED
Highly reflective, near-flawless mirror polish achieved through progressive buffing.
Best for decorative panels, columns, reflectors
Bead BlastMATTE
Uniform low-gloss matte texture from glass-bead media — hides fingerprints and wear.
Best for street furniture, facades, handrails
VibrationNON-DIRECTIONAL
Swirled, non-directional satin pattern that diffuses reflections evenly from any angle.
Best for large facades, feature walls
PVD GoldTiN COATING
Physical vapour deposition gives a hard, durable, colour-stable gold tone over any base finish.
Best for hospitality, retail, luxury interiors
PVD Rose GoldPVD
Warm rose tone via PVD — scratch-resistant and far more durable than electroplating.
Best for feature panels, fixtures, trims
PVD BlackPVD
Deep, even black coating — dramatic and hard-wearing for contemporary architecture.
Best for facades, signage, statement interiors
In-House Processing
We finish it before it leaves us
Stock arrives, gets processed to your spec, and ships with documentation — no third-party hand-offs to manage.
/ 01
Cut-to-Length & Shearing
Coils and sheets cut to exact length and squared blanks, deburred ready to fabricate.
±0.5 mm tol.
up to 6 mm
up to 6 mm
/ 02
Slitting
Master coils slit to precise widths with clean, burr-controlled edges to your tolerance.
width ≥ 20 mm
mill / slit edge
mill / slit edge
/ 03
Polishing & Graining
No.4, hairline, mirror and bead-blast finishes applied consistently across the sheet.
No.4 · HL
No.8 · bead
No.8 · bead
/ 04
PVD Coating
Vacuum-deposited colour coatings — gold, rose and black — bonded hard to the surface.
gold · rose
black
black
Sampling available
Want to see the finish in the metal?
Request physical swatches in your chosen grade and finish before you commit to a production order.