Coils
Hot- and cold-rolled master coils — the mill form behind every sheet, strip and tube.
- Grades
- 201 · 202 · 304 · 304L · 316 · 316L · 430
- Standard
- ASTM A240/A480 · IS 6911
- Used in
- Re-rolling, tube mills, appliance & auto pressing
Catalogue
Every form,
held to spec.
Twelve product families across the grades India actually buys — stocked, processed and certified. Spec tables below follow ASTM A240/A480 and IS 6911.
Sheets
Cold-rolled stainless sheet in the full finish range, slit or sheared to size.
- Grades
- 202 · 304 · 304L · 316 · 316L · 430
- Standard
- ASTM A240/A480 · IS 6911
- Used in
- Kitchen equipment, fabrication, cladding, utensils
Plates
Hot-rolled annealed & pickled plate for tanks, structures and pressure parts.
- Grades
- 304 · 304L · 316 · 316L · 310 · Duplex 2205
- Standard
- ASTM A240 / ASME SA-240 · IS 6911
- Used in
- Pressure vessels, heavy engineering, structural
Strips & Slit Coil
Precision-slit strip wound to your exact width and edge condition.
- Grades
- 201 · 202 · 304 · 430
- Standard
- ASTM A240/A480 · IS 6911
- Used in
- Tube manufacturing, auto components, springs
Pipes & Tubes
Seamless and welded — round, square and rectangular, mill or polished finish.
- Grades
- 304 · 304L · 316 · 316L · Duplex
- Standard
- ASTM A312/A269/A213 · A554
- Used in
- Plumbing, process/chemical, dairy, handrails
Bars & Rods
Round, square, hex and flat bar — bright drawn, peeled or black.
- Grades
- 303 · 304 · 304L · 316 · 316L · 410 · 431
- Standard
- ASTM A276/A479 · IS 6603
- Used in
- Machining, shafts, fasteners, fabrication
Angles, Flats & Channels
Equal & unequal angle, flat bar and channel for fabrication and framing.
- Grades
- 304 · 316 · 409 · 410 · 430 · Duplex
- Standard
- ASTM A276/A479 · IS 6603
- Used in
- Structural, frames, fabrication, gratings
Wire
Drawn wire for springs, mesh, binding and welding consumables.
- Grades
- 302 · 304 · 316 · 316L
- Standard
- ASTM A580/A555 · IS 6528
- Used in
- Springs, mesh, fasteners, welding wire
Circles
Blanked discs from sheet or coil for cookware and vessel ends.
- Grades
- 202 · 304 · 410 · 430 (utensils) · 316
- Standard
- ASTM A240 · IS 6911
- Used in
- Cookware, pressure-cooker bodies, vessel ends
Fittings & Flanges
Butt-weld elbows, tees, reducers, caps and flanges to ASME B16.
- Grades
- 304 · 304L · 316 · 316L · Duplex
- Standard
- ASME B16.9 / B16.5 / B16.47
- Used in
- Piping systems, process plants
Chequered & Tread Plate
Anti-slip raised-pattern plate for stairs, walkways and platforms.
- Grades
- 304 · 316
- Standard
- ASTM A240 · IS 6911
- Used in
- Flooring, stairs, platforms, walkways
Decorative & PVD
PVD-coloured, embossed and patterned sheet for architecture and interiors.
- Grades
- 202 · 304 · 316
- Standard
- Base IS 6911 / ASTM A240 + PVD (TiN) coat
- Used in
- Architecture, elevators, hotels, interiors, signage
All material priced ₹/kg · indicative · nickel-linked · GST extra. Mill test certificate (EN 10204 3.1) supplied with every consignment. Cut-to-size with no minimum order.
Grade Specifications
Reference data, grade by grade
Standard values for the grades we stock. Confirm against the mill test certificate for your specific heat before design sign-off.
| Grade | UNS | C | Mn | Cr | Ni | Mo | N | Others |
|---|---|---|---|---|---|---|---|---|
| 201 | S20100 | 0.15 | 5.5–7.5 | 16.0–18.0 | 3.5–5.5 | — | 0.25 | Si 1.00 |
| 202 | S20200 | 0.15 | 7.5–10.0 | 17.0–19.0 | 4.0–6.0 | — | 0.25 | Si 1.00 |
| 304 | S30400 | 0.08 | 2.00 | 18.0–20.0 | 8.0–10.5 | — | 0.10 | P 0.045 |
| 304L | S30403 | 0.030 | 2.00 | 18.0–20.0 | 8.0–12.0 | — | 0.10 | P 0.045 |
| 316 | S31600 | 0.08 | 2.00 | 16.0–18.0 | 10.0–14.0 | 2.0–3.0 | 0.10 | P 0.045 |
| 316L | S31603 | 0.030 | 2.00 | 16.0–18.0 | 10.0–14.0 | 2.0–3.0 | 0.10 | P 0.045 |
| 409 | S40900 | 0.08 | 1.00 | 10.5–11.75 | 0.50 | — | — | Ti 6×C |
| 430 | S43000 | 0.12 | 1.00 | 16.0–18.0 | — | — | — | Si 1.00 |
| 310S | S31008 | 0.08 | 2.00 | 24.0–26.0 | 19.0–22.0 | — | — | Si 1.50 |
| 2205 | S32205 | 0.030 | 2.00 | 22.0–23.0 | 4.5–6.5 | 3.0–3.5 | 0.14–0.20 | Duplex |
| Grade | Tensile str. (MPa) | Yield 0.2% (MPa) | Elongation (%) | Hardness | Structure | Density (g/cm³) |
|---|---|---|---|---|---|---|
| 201 | 515 | 260 | 40 | 95 HRB | Austenitic | 7.85 |
| 202 | 515 | 275 | 40 | 95 HRB | Austenitic | 7.80 |
| 304 | 515 | 205 | 40 | 201 HBW | Austenitic | 8.00 |
| 304L | 485 | 170 | 40 | 201 HBW | Austenitic | 8.00 |
| 316 | 515 | 205 | 40 | 217 HBW | Austenitic | 8.00 |
| 316L | 485 | 170 | 40 | 217 HBW | Austenitic | 8.00 |
| 409 | 380 | 205 | 20 | 179 HBW | Ferritic | 7.70 |
| 430 | 450 | 205 | 22 | 183 HBW | Ferritic | 7.70 |
| 310S | 515 | 205 | 40 | 217 HBW | Austenitic | 8.00 |
| 2205 | 655 | 450 | 25 | 293 HBW | Duplex | 7.80 |
| Grade | Sheet thk. | Plate thk. | Coil width | Sheet size | Other forms | Typical finish |
|---|---|---|---|---|---|---|
| 201 | 0.4–3.0 mm | — | ≤1250 mm | 1219×2438 | Coil, strip | 2B, No.4 |
| 202 | 0.4–3.0 mm | — | ≤1250 mm | 1219×2438 | Coil, strip, circle | 2B, No.4 |
| 304 | 0.3–6.0 mm | 6–80 mm | ≤1500 mm | 1219/1500×3048 | Pipe, bar, angle | 2B, BA, No.4, No.8 |
| 304L | 0.5–6.0 mm | 6–60 mm | ≤1500 mm | 1219/1500×3048 | Pipe, fitting | 2B, No.1 |
| 316 | 0.4–6.0 mm | 6–80 mm | ≤1500 mm | 1219/1500×3048 | Pipe, bar, flange | 2B, BA, No.4 |
| 316L | 0.5–6.0 mm | 6–60 mm | ≤1500 mm | 1219/1500×3048 | Pipe, fitting | 2B, No.1 |
| 409 | 0.5–3.0 mm | — | ≤1250 mm | 1219×2438 | Coil, sheet | 2B, No.1 |
| 430 | 0.4–2.0 mm | — | ≤1250 mm | 1219×2438 | Coil, strip | 2B, BA |
| 310S | 1.0–6.0 mm | 6–50 mm | ≤1500 mm | 1500×3000 | Plate, pipe | No.1, 2B |
| 2205 | 1.0–6.0 mm | 6–50 mm | ≤1500 mm | 1500×3000 | Plate, pipe | No.1, 2B |
Reference data compiled from published ASTM/IS standards for design guidance. Always verify against the certified mill test report for the delivered heat.
Need a grade that isn't listed?
Tell us the application — we'll match the grade.
Send your drawing or spec and we'll recommend grade, finish and form, with availability and lead time.